Beacon™ Modular Building System

Design Features

• Available in 17 sizes and two colours.

• Excellent level of insulation minimises heat loss in winter and gain in summer.

• Thermal break extrusion reduces internal condensation.

• Concealed rainwater management system guides runoff to ground-level corner outlets.

• Chassis provides optimal structural rigidity.

• An overlaid roof membrane minimises the effects of water infiltration.

• Perimeter roof fascia provides convenient fixing points for signage.

• Full-width panel glazing improves site security surveillance.

• Attractive internal wall lining and suspended ceiling create a pleasant working environment.

• A wide range of colours, 16 wall panel configurations, and optional features like lighting, heating, and ventilation allow the Beacon to be tailored to specific needs and corporate themes.

• Optional extras for the exterior and interior of the building – including worktops, cabinets, internal partitions, electrics and lighting.

• Selection of wall panel configurations including blank, fixed windows, sliding windows, high-level windows, fixed and opening, and a glazed door.

• Available in standard panel increments of 1.22m – Beacon buildings can be configured from 1.22 x 2.44m to 7.32 x 3.66m.

• Multiple units can be connected if a larger unit is required.

• Delivered fully assembled and off-loaded by crane.

• The building can be relocated at a future date if required.

• Available with a pitched roof for outdoor siting.

• U-Values:

  • Composite Wall Panels - 0.43 W/m2 °C
  • Roof Construction - 0.17 W/m2 °C
  • Floor Construction - 0.30 W/m2 °C

  
  

Colours

Materials

Dimensions